Installation
Assembly
18
18. Secure the Accessory Tray from above with four M6x15 Button
Head Cap Screws as shown using the 4mm Allen wrench (Figure
2-19).
19. Secure the tray from underneath with two M6x15 Button Head Cap
Screws as shown using the 4mm Allen wrench (Figure 2-20).
Figure 2-20. Accessory Tray Installation - Lower Screws
20. Remove Console/Display from box. There are three cables coming
from the bottom of the Console: the long Upper Wire Harness, the
flat ribbon cable, and the wireless pulse cable (Figure 2-21).
Figure 2-21. Console/Display Cables
M6x15 Button Head Cap
Screws (2x)
Wireless Pulse
Cable
Upper Wire
Harness
Guide Wire
Tie
Ribbon Cable
