Assembly
Installation
15
12. On both sides: Attach the Remote Console Assembly to the
Upright Brackets using one M8x15 Socket Head Cap Screw, found
on blister pack (Figure 2-15). Secure with 6mm Allen wrench.
Figure 2-15. Remote Console Assembly Plate Hardware
(both sides)
13. Remove the three M5x15 Socket Head Cap Screws holding the
Inner Handrail Covers to each Handrail, using the 4mm Allen
wrench, as shown in Figure 2-16 and place them in a safe place for
reuse later when the Covers are re-installed.
Figure 2-16. Handrail Inner Cover Hardware (both sides)
M8x15 Socket
Head Cap Screw
(1 per side)
M5x15 Socket Head
Cap Screw (3X)
