background image

 

 

This

 

document

 

is

 

the

 

property

 

of

 

LANDI.

 

Its

 

content

 

cannot

 

be

 

reproduced

 

or

 

divulged

 

without

 

the company’s

 

written

 

approval.

 

   

3

 

/

 

18

 

Disclaimer 

z

 

Although every effort has been made to ensure the accuracy and completeness, it is acknowledged that there may 
be errors or omissions in this manual.  

z

 

Fujian LANDI reserves the entire copyright of this manual. Fujian LANDI also reserves the right to modify the software, 
hardware and/or documents of the product without prior declaration. 

z

 

Owing to product updating, certain details in this guide may differ slightly from the actual equipment, please take the 
actual product as the standard. LANDI is in possession of the rights to change the contents of the guide. 

z

 

All or any part of this manual shall not be copied, modified, disclosed, or authorized used in any method without Fujian 
LANDI’s prior written consent. Fujian LANDI reserves the right to claim compensation on all direct or indirect loss 
incurred by the above illegal action. 

z

 

Fujian LANDI shall not be liable for any damages, failures and data loss to device or accessories resulting from improper 
operation not in accordance with the guidance of this manual. 

Environment Friendly Notice 

The environmental-friendly use period of this product is 10 years under normal working, storage and transport conditions 

which are defined in the product technical specifications. 

 

You are suggested to return the device (package included) to Landi when it is end of life. 

Component  

Toxic & Hazardous Substances or Elements 

Plumbi

Pb

 

Hydrarg

yrum

Hg

 

Cadmi

um

Cd

 

Sexavalent 

chrome 

Cr(VI)

 

Polybrominated 

biphenyl 

PBB

 

Polybrominated 

diphenylether

PBDE

 

Casing 

 

 

 

 

 

 

Circuit 

Board 

× 

 

 

 

 

 

Accessories × 

 

 

 

 

 

This table is based on the provisions of SJ/T 11364. 
 

○:

The average content of the poisonous harmful substance or element in the component is below the limit of  GB/ T 

26572 standard. 

×:

The average content of the poisonous harmful substance or element in the component is above the limit of GB/ T 

26572 standard. 

p.s.

 

1.

 

Most components of the device are made of environmental friendly material. Attention is drawn to the fact that 
certain components made of toxic & hazardous substances or elements, are subjected to global technology which 
restricts the realization of substitute for the toxic & hazardous substances or elements. 
 

2.

 

The reference environment data ( eg. humidity, temperature etc.) is obtained from the test at the normal working 
and storage conditions required by the device. 

Security Information 

 
 
 

Laser statement 

 
 

 

 

 
 
 

Danger

 

-

 

When using device containing laser component (eg. barcode scanner), do not disassemble the device cover, 
for it may result in hazardous laser radiation. Do not look directly into the laser beam nor be directly 
irradiated, to avoid hurts to eyes or skins. 

Summary of Contents for E830RFWD



















Reviews: