background image

    8.914-000.0  •  8.917-410.0  •  9.800-340.0  •  8.919-014.0  •   Rev. 06/12

PRESSURE W

ASHER 

T

roub

leshooting 

Guide

10

PREVENTATIVE MAINTENANCE

This pressure washer was produced with the best available materials and quality craftsmanship. However, you 
as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative 
maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer for 
maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform 
maintenance more often under severe conditions.

OIL CHANGE RECORD

Check pump oil and engine oil level before fi rst use of your new pressure washer.

Pump Oil

Inspect

Daily inspect the oil level

Change

After fi rst 50 hours, then every 500 hours or annually

Replace high pressure nozzle

Every 6 months

Replace quick connects

Annually

Clean water screen/fi lter

Weekly

Replace HP hose

Annually if there is any sign of wear

Grease motor

Every 10,000 hour

Belt Tension/Inspection

Daily

Check Air Pressure in Tires

Daily

Date Oil Changed

Month/Day/Year

Estimated Operating 

Hours Since Last 

Oil Change

Date Oil Changed

Month/Day/Year

Estimated Operating 

Hours Since Last 

Oil Change

Summary of Contents for MPE5-50024B

















Reviews: