10
Operations
Assembly Instructions
STEP 1:
Attach a 5/8" water supply
hose to inlet connector. Minimum
flow should be 5 GPM.
STEP 4:
Check oil level on sight
glass on side of pump. Oil should
be visible one-half way up sight
glass (SAE 10W-40 non-foaming).
The oil level can also be checked
by using the dipstick on the top of
the pump.
STEP 2:
Attach high pressure hose
to discharge nipple using quick
coupler. Lock coupler securely into
place by pulling back coupler collar
and inserting it onto discharge
nipple and then pushing coupler
collar forward to lock in place.
STEP 5:
Fill gasoline tank and
check engine oil level. Fill fuel oil
tank. Do not confuse gasoline and
fuel oil (diesel) tanks. Keep proper
fuel in proper tanks.
Read engine operator manual for
oil and other recommendations.
STEP 3:
Attach variable pressure
control wand to spray gun and
swivel connector on high pressure
hose to spray gun using teflon tape
on threads to prevent leakage.
CAUTION: Engage the safety
latch on the spray gun trigger.
STEP 6:
Install proper battery
making sure that the red cable is
attached to the positive terminal.
Use a U1 30 amp garden tractor
style battery (battery not included).
Landa MHP Operator’s Manual 8.913-925.0 - T
Garden
Hose
Water
Inlet
Collar
High
Pressure
Hose
Discharge
Nipple
Spray
Gun
High Pressure
Hose
Wand
Safety
Switch
Red
Black
Oil
Dipstick