36
Handheld Wireless Operating Instructions
For Wireless Remote Control Operation
Step 1:
Push the control panel pump switch to the "ON"
position (first click). With the switch in this position the
wireless remote is ready for use.
Step 2:
To control pressure
washer in remote mode, press
transmitter button 1 to turn pump
"ON". Press transmitter button 2
to turn pump "OFF". Pump can
also be controlled manually by
pressing the control panel pump
ON/OFF switch.
Chemical 1:
To start chemical 1
flow, press transmitter button 3.
The green indicator light will illu-
minate when chemical 1 is in
use. Press button 3 again to stop
chemical 1 flow.
Chemical 2:
To start chemical 2 flow, press transmitter
button 4. The green indicator light will illuminate when
chemical 2 is in use. Press button 4 again to stop
chemical 2 flow.
When machine is not in use, push control panel pump
switch to the "OFF" position. Store transmitter on the
transmitter bracket.
NOTE:
Normal operating range for the transmitter is
about 500 feet interference-fee (line of site); 300 feet
light interference (inside warehouse, pallet shelves);
and 100 feet heavy interference (through concrete/
stone walls, metal doors). If greater range is desired,
the antenna can be mounted at a separate location.
This requires a longer cable - RG-58-U coaxial with
BNC end connectors.
Landa EHW Operator’s Manual 8.941-114.0 - M
Pump Switch
Transmitter
Bracket
Chemical 2
Light
Chemical 1
Light
Transmitter