PRODUCT WARRANTY
EXCLUSIONS FROM WARRANTY
It should be noted that costs associated with calibration checks which may be requested during the warranty
period are not covered within the warranty.
Land reserve the right to charge for service/calibration checks undertaken during the warranty period if the
cause is deemed to fall outside the terms of the warranty.
This Land manufacturer’s warranty does not cover product malfunction arising from:-
• incorrect electrical wiring.
• connection to electrical power sources outside the rating of the product.
•
physical shock (being dropped, etc.) and impact damage.
•
inappropriate routing, support, physical shock & strain protection, etc. of the lightguide (Fibroptic
thermometers only).
•
environmental conditions exceeding the IP / NEMA rating of the product.
•
environmental conditions outside the Ambient Temperature, Humidity and Vibration rating of the product.
•
environmental contamination (solvent vapours, deposition of airborne contamination, cooling liquids of
non-neutral pH, etc.).
•
overheating as a result of interruption of water/air fl ow through cooling jackets or of incorrect installation.
•
inappropriate modifi cation of product (drilling holes in thermometer bodies, etc.).
•
inappropriate recalibration which results in product calibration being taken outside specifi cation.
•
improper resealing of thermometer following parameter adjustment (UNO, FLT5/A, etc.).
• attempted repair by a non-Land-authorised repair centre.
Land Instruments International Ltd • Dronfield S18 1DJ • England • Tel: +44 (0) 1246 417691 • Fax: +44 (0) 1246 410585
Email: [email protected] •
www.landinst.com
AMETEK Land, Inc. • 150 Freeport Rd. • Pittsburgh, PA 15238 • U.S.A. • Tel: +1 (412) 826 4444
Email: [email protected] •
www.ametek-land.com
For a complete list of our international offices, please visit
www.landinst.com
Issue 4: 23 November 201
6
MARCOM0290
