Land Pride STB0554, Operator'S Manual

Page: 16 / 36

Section 1: Assembly & Set-up
Table of Contents
1/25/21 STB0554 & STB0560 Snow Trip Blade 301-701M
12
Angling Options Assembly
Land Pride offers two angling options for the Snow Trip
Blade. The Snow Trip Blade can be angled either
manually or hydraulically.
DANGER
!
To prevent serious injury or death:
Hydraulic fluid under pressure can penetrate skin. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. Use a piece of cardboard or wood
rather than hands when searching for hydraulic leaks. If
hydraulic fluid is injected into the skin, it must be treated by a
doctor within a few hours or gangrene may result.
IMPORTANT: Make sure threads and inside of
fittings and hoses are clean.
Manual Angle-Bent Pin Assembly
Refer to Figure 1-4:
1. Drive 1/4" x 1 3/4" roll pin (#1) through bent pin (#2).
2. Align holes on the pivot weldment and hitch
assembly to desired angle.
3. Push the bent pin assembly through holes as shown.
Manual Angle-Bent Pin Assembly
Figure 1-4
2
1
74860