Land Pride Soil Pulverizer SP20 Series Operator'S Manual Download Page 9

Introduction 

Table of Contents

11/28/18

SP2060, SP2072, SP3072 & SP3084 Soil Pulverizers 307-099M

5

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your Soil Pulverizer have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new Soil 
Pulverizer. If for any reason you do not understand any 
part of this manual or are not satisfied with the service 
received, the following actions are suggested:

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

35029

Land Pride welcomes you to the growing family of new 
product owners. This Soil Pulverizer has been designed 
with care and built by skilled workers using quality 
materials. Proper assembly, maintenance, and safe 
operating practices will help you get years of satisfactory 
use from this machine

Application

The SP20 and SP30 Soil Pulverizers are designed and 
built by Land Pride to loosen, pulverize, and level packed 
or encrusted soils in preparation for seeding or laying of 
new sod. Both the 20 and 30 Series Pulverizers are 
adapted for Category 1 three-point hitch mounting. The 
20 series has a minimum 35 hp tractor requirement while 
the 30 Series has a minimum 50 hp requirement. 

Land Pride Soil Pulverizers come in 60", 72", and 84" 
working widths making them well suited for use by 
landscapers, rental yards, construction contractors, and 
professional turf managers. Applications include golf 
courses, housing developments, athletic fields, 
nurseries, sod farms, transportation right-of-ways, and 
park systems. 

See 

“Specifications & Capacities” 

on page 13 and 

“Features & Benefits”

 on page 14 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
you with safety, assembly, operation, adjustments, 
troubleshooting, and maintenance. Read this manual 
and follow the recommendations to help ensure safe 
and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge from our website at 
www.landpride.com.

Terminology

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

Definitions

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

Introduction

Summary of Contents for Soil Pulverizer SP20 Series























Reviews: