Land Pride Soil Pulverizer SP20 Series Operator'S Manual Download Page 11

Section 2: Operating 

Table of Contents

11/28/18

SP2060, SP2072, SP3072 & SP3084 Soil Pulverizers 307-099M

7

Operator’s Responsibilities

Hazard control and accident prevention are dependent 
upon the awareness, concern, prudence and proper 
training involved in the operation, transport, storage, and 
maintenance of the Soil Pulverizer. Therefore, it is 
absolutely essential that no one operates the Soil 
Pulverizer unless they are age 16 or older and have read, 
fully understood, and are totally familiar with the 
Operator’s Manual. 

Perform the following inspections before using your Soil 
Pulverizer.

Tractor Shutdown Procedure

The following are basic tractor shutdown procedures. 
Follow these procedures and any additional shutdown 
procedures provided in your tractor Operator’s Manual 
before leaving the operator’s seat.

1.

Reduce engine speed and disengage power take-off 
if engaged.

2. Park tractor and implement on level, solid ground.

3. Lower implement to ground or onto non-concrete 

support blocks.

4. Put tractor in park or set park brake, turn off engine, 

and remove switch key to prevent unauthorized 
starting.

5. Relieve all hydraulic pressure to auxiliary hydraulic 

lines.

6. Wait for all components to come to a complete stop 

before leaving the operator’s seat.

7.

Use steps, grab-handles and anti-slip surfaces when 
stepping on and off the tractor.

Operating Checklist

Check

Ref.

Inspect tractor safety equipment to make sure 
it is in good working condition.

Tractor 

Manual

Read and follow all Safety Rules carefully. 
Refer to “Important Safety Information”.

Page 1

Make sure all safety labels are in their proper 
location and in good readable condition.

Page 4

Check 3-Point hook-up procedure. Be sure all 
pins have been installed and are secured.

Page 6

Read and follow all operating instructions. 
Refer to “Section 2: Operating”.

Page 7

Make all required adjustments. 
Refer to “Section 3: Adjustments”.

Page 10

Read and follow all Maintenance Instructions. 
See “Section 4: Maintenance & Lubrication”.

Page 11

Check initially and periodically for loose bolts 
and pins. Refer to “Torque Values Chart”.

Page 16

Safety First

!

DANGER!

To avoid serious injury or death:  

Keep bystanders and animals away from machinery while 

in operation. They can become entangled in the equipment, 

hit by throwing objects, or ran over.

Always secure equipment with solid, non-concrete supports 

before working under it. Never go under equipment 

supported by concrete blocks or hydraulics. Concrete can 

break, hydraulic lines can burst, and/or hydraulic controls 

can be actuated even when power to hydraulics is off.

!

WARNING!

To avoid serious injury or death:  

Never carry riders on the implement or tractor. Riders can 

obstruct the operator’s view, interfere with control of the 

equipment, be pinched by moving components, become 

entangled in rotating components, be struck by objects, be 

thrown or fall from the equipment, etc.

Always keep your body extremities out from under the 

shanks while adjusting them. It is possible for the shanks to 

fall causing injury to your feet and/or legs.

Make sure safety labels are in their proper location and are 

in good condition before operating the attached implement. 

Read and obey all instructions on the labels.

Allow only persons to operate this implement who have 

fully read and comprehended this manual, who have been 

properly trained in the safe operation of this implement, and 

who are age 16 or older. Serious injury or death can result 

from the inability to read, understand, and follow 

instructions provided in this manual.

Use the implement for its intended purpose only. 

Do not use implement to lift objects; to pull objects such as 

fence posts, stumps, etc; or to push objects. The unit is not 

designed or guarded for these uses.

Do not use implement to tow other equipment unless it is 

designed with a tow hitch. Doing so can result in loss of 

control and damage the equipment.

Do not alter implement or replace parts on the implement 

with other brands. Other brands may not fit properly or 

meet OEM (Original Equipment Manufacturer) 

specifications. They can weaken the integrity and impair the 

safety, function, performance, and life of the implement. 

Replace parts only with genuine OEM parts.

Never make contact with underground utilities such as 

electrical power lines, gas lines, phone lines, etc. They can 

cause serious injury or death from electrocution, explosion, 

or fire. If in doubt, call 811 (USA) before digging so that 

they can mark the location of underground services in the 

area. For contact information, see Dig Safe in the 

“Important Safety Information” starting on page 1.

Section 2: 

Operating

Summary of Contents for Soil Pulverizer SP20 Series























Reviews: