Introduction
6/17/21
8
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Claw Grapple have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the attachment.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new Claw
Grapple. If for any reason you do not understand any part
of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss any problems you have with your attachment
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
37408
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Claw Grapple has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this attachment.
Application
The SGC0660 Claw Grapple has uses and applications in
farming, ranching, vineyards, orchards, resorts,
nurseries, campuses, theme parks, lumber yards, small
retail outlets, and warehouses. The SGC0660 Claw
Grapple is suited for tractors with a lift capacity of 1150 lbs
(522 kg) or less. Designed to attach to a loader hitch plate,
this attachment can quickly turn your tractor’s front
mounted loader into a grapple, expanding your material
handling capability.
Tractor users will find this 60" (152 cm) wide Claw Grapple
will save time and money and make getting that material
handling job done a whole lot easier.
The SGC0660 Claw Grapple is not designed for skid
steers and should not be used on skid steers.
For additional information, see “
Specifications &
Capacities
”
on page 24 and “
Features & Benefits
” on
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
the direction the operator faces while sitting looking
forward in the operator’s seat unless otherwise stated.
