Section 2: Set-Up of Accessories
11/27/18
13
Ratchet Jack Option
1.
Attach ratchet jack (#19) to mounting lugs on gauge
wheel arm (#3) and mounting bracket (#11) with two
1" clevis pins (#20). Secure pins with hair pin cotters
(#21).
Hydraulic Cylinder Option
1.
Position hydraulic cylinder (#15) with ports on top as
shown. Thread 90 degree elbows (#13) into the two
ports and tighten.
2. Screw 123" long hydraulic hoses (#14) to the elbows
and tighten.
3. Thread hydraulic couplings (#18) to the other end of
hydraulic hoses and tighten. (Customer to supply
quick disconnect hydraulic couplings.)
4. Attach hydraulic cylinder to mounting lugs on gauge
wheel with two 1" clevis pins (#17). Make sure
hydraulic ports are positioned on top and cylinder
base is located to the front as shown.
5. Secure clevis pins with hair pin cotters (#16).
6. Route hoses through hose brackets located on top of
main frame and right side of front hitch. Connect
hoses to tractor's hydraulic system.
IMPORTANT:
Attach cylinder base to the front
mounting lug. The base will interfere with the gauge
wheel arm if attached to the rear mounting lug.
Gauge Wheel
Kit Bundles
301-149A . . . . . .HYDRAULIC SINGLE GAUGE WHEEL
301-150A . . . . . . . HYDRAULIC DUAL GAUGE WHEEL
301-283A . . . . . . . . MANUAL SINGLE GAUGE WHEEL
301-248A . . . . . . . . . . MANUAL DUAL GAUGE WHEEL
1.
Attach gauge wheel mounting bracket (#11) to blade
frame with two 3/4"-10 x 10 1/2" GR5 hex head bolts
(#8) and 3/4" hex nuts (#10). Tighten nuts to correct
torque.
2. Insert gauge wheel hitch tube (#9) in gauge wheel
arm (#3).
3. Attach gauge wheel arm (#3) to mounting bracket
(#11) with 3/4"-10 x 10 1/2" GR5 hex head bolt (#8)
and 3/4" hex nut (#10). Tighten nut to correct torque.
4. Insert gauge wheel caster assembly (single wheel
caster #1) or (dual wheel caster #2) in gauge wheel
arm (#3) and retainer washer (#4). Secure caster
assembly with 1/2" x 2 1/2" long roll pin (#5).
5. Attach center floating link (#12) to the front hitch with
1 1/4" x 1 3/4" hitch pin (#7). Secure with hair pin
cotter (#6).
Gauge Wheel Assembly
Figure 2-5
25505
Customer to supply Quick
Disconnect Couplings.
