Land Pride Rear Blades RBT4084, Operator'S Manual

Page: 22 / 34

Section 4: Adjustments
RBT4084, RBT4096 & RBT40108
Rear Blades 301-206M 11/27/18
18
Table of Contents
Blade Tilt
Manual Tilt Adjustment
Refer to Figure 2-4 on page 13:
The blade end can be tilted manually by as much 15
degrees with the ratchet jack.
1. Read and follow “Safety First” on page 17 before
tilting the blade.
2. Set ratchet lock and pump lever back and forth to
raise one end of the blade higher than the other end.
3. Reposition ratchet lock and pump lever back and
forth to tilt blade in the opposite direction.
Hydraulic Tilt Adjustment
Refer to Figure 2-3 on page 12:
The blade end can be tilted hydraulically with the tilt
cylinder by as much as 15 degrees.
1. Read and follow “Safety First” on page 17 before
tilting the blade.
2. If the tilt cylinder is controlled by the hydraulic
selector valve, make certain the valve is set to
operate that cylinder.
3. Operate tractor control lever to change blade tilt by as
much as 15 degrees.