Introduction
11/27/18
6
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your 3-Way Rear Blade have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
3-Way Rear Blade. If for any reason you do not
understand any part of this manual or are not satisfied
with the service received, the following actions are
suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
3
35916
Land Pride welcomes you to the growing family of new
product owners. This 3-Way Rear Blade has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this machine.
Application
The Land Pride RBT40 Series 3-Way Hydraulic Rear
Blades are built from the ground up for applications
ranging from landscaping, construction, snow removal,
and feedlot cleaning. This blade is also ideal for ditching,
road grading, and all-around farm use.
The RBT40 Series Rear Blades are designed for
Category I or II 3-Point hitch mounting, attachment to
tractors in the 65 to 100 hp range, and are Quick Hitch
compatible. The blade with its reversible cutting edge can
be angled left or right up to 45
o
, the ends can be tilted up
or down by as much as 15
o
and the whole blade can be
offset to the left or right by as much as 30". The blade can
also be rotated 180
o
for blading in reverse with same
angling, tilting, and offset capabilities. A retractable
parking stand is included to accommodate easier blade
removal, storage, and reattachment.
Available options are manual or hydraulic angling,
offsetting, and tilting. Accessories includes end plates for
holding material and skid shoes for blade protection.
See
“Specifications & Capacities”
“Features and Benefits”
on page 26 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
