Section 6: Specifications & Capacities
RC(M)3715 & RCG(M)3715 Rotary Cutters 334-114M
1/26/21
56
Section 6: Specifications & Capacities
RC(M)3715 & RCG(M)3715 Models
Specifications & Capacities
Horsepower range
50 - 160 hp (37.3 - 119.3 kw)
Gearbox horsepower
540 rpm or 1000 rpm
160 hp (119.3 kw) Divider and 130 hp (96.9 kw) Center & Wings
Gearbox lubrication
Gear Lube 80-90W EP
Gearbox oil capacity
Splitter: 3.5 pints (1.66 L); Center deck & Wings: 6 pints (2.84 L)
Cutting capacity
3" (7.6 cm)
Machine weight
Total weight
Tongue weight
4,380 lbs (1986.7 kg)
1,594lbs (723.0 kg)
Blade tip speed
At 540 rpm
At 1000 rpm
Center Blades = 15,268 FPM (77.6 mps) & Wing Blades = 15,000 FPM (76.2 mps)
Center Blades = 15,578 FPM (79.1 mps) & Wing Blades = 14,620 FPM (74.3 mps)
Hitch types
Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack
Standard (7,000 lbs) (3175.1 kg)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Transport width with 21" tires
15’-0" (4.57 m)
15’-10" (4.83 m)
10’-3" (3.12 m) (Single acting fold option) 7’-3" (2.21 m) (Dual acting fold option)
Overall length
16'-3" (4.95 m) (With center deck raised fully up)
Deck height
12" (30.5 cm)
Cutting height
1-1/2" - 16" (3.8 cm - 40.6 cm) (Varies by tire option)
Lift hydraulics
3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics
2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection
Wing Transport Lock Pins
Deck material thickness
10 Gauge (3.4 mm)
Side skirt thickness
1/4" (6 mm) Steel
Skid shoes
Wing Deck: 1 Replaceable skid shoe per wing
Center Deck: 2 Replaceable skid shoes
Blades - 6 (2 per carrier)
1/2" x 4" (1.3 cm x 10.2 cm) Heat-treated,
free-swinging alloy steel with uplift
Blade overlap
6" (15.2 cm)
Blade bolt
Keyed with hardened flat washer & locknut
Stump jumper / blade holder
3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar
Front & rear guards
Optional single row chain or dual row chain
Input driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint with or without overrunning clutch
Intermediate driveline
Standard - Category 4 with slip-clutch
Wing drivelines
Standard - Category 4 with slip-clutch or Category 5 with slip-clutch
Wheel options
21" or 26" Laminated tires
25.5" New foam filled tires
25.5" New 20-ply pneumatic tires
29" Used aircraft tires
Number of wheels
4 - Wheels: Two on transport axle and one on each wing axle
6 - Wheel option: Four on transport axle and one on each wing axle
8 - Wheel option: Four on transport axle and two on each wing axle
Transport axle
Spring-cushioned on center transport axle
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts
LP Performance hitch & Bar tite
hitch pivot shaft diameter
2 1/4" (5.7 cm)
A-frame tongue
5" x 3" (12.7 cm x 7.6 cm) rectangular tubing
