38
Section 2: Assembly of Optional Equipment
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
8/20/21
Pull-Type Hitch Options
The RCF3096, RCF3010, & RCFM3010 cutters have two
hitch options, swivel clevis hitch shown in Figure 2-6 or
Land Pride Performance hitch shown in Figure 2-7. See
your nearest Land Pride dealer should you want to
change your hitch set-up.
Refer to Figure 2-5:
The driveline is cradled on support rest (#9) when
unhooked from the tractor power take-off shaft. Jack
mount (#6) can be adjusted to position park jack (#7)
vertical to support the cutter hitch.
Swivel Clevis Hitch
Refer to Figure 2-6:
The hitch has a bent lower lip to allow single-person
hook-up and can swivel side-to-side about the tractor
drawbar. Pivoting up and down at the hitch is limited to
the lower slot in the clevis and hole size in the drawbar.
Customer to supply hitch pin and hitch pin keeper.
Land Pride Performance Hitch
Refer to Figure 2-7:
The LP Performance Hitch is a drawbar friendly,
self-leveling hitch that pivots up and down, and side-to-
side. It has a bent lower lip and horizontal holes on top for
hitch pin storage to allow single-person hook-up.
Customer to supply hitch pin and hitch pin keeper.
Change Out Hitches
Refer to Figure 2-5:
IMPORTANT:
Cutter must be parked on level
ground, unhooked form the tractor, hitch supported
with park jack (#7), and ball detent pin (#8) fully
inserted to protect against cutter falling.
Swivel Clevis
Figure 2-6
Land Pride Performance Hitch
Figure 2-7
1. Remove locknut (#4) and bolt (#2).
2. Remove hitch (#1A or #1B) from tongue (#5).
Bushing (#3) will fall from tongue (#5).
3. Hold supplied bushing (#3) with tab down and to the
back while insert bushing through slotted hole in the
bottom of tongue (#5).
4. Insert preferred hitch (#1A or #1B) through hole in
the end of tongue (#5) and bushing (#3).
5. Insert existing bolt (#2) through bushing (#3) and
hitch (#1A or #1B). Secure bolt with locknut (#4).
Draw locknut up snug, do not torque tight.
Part No.
Description
334-006A Swivel Clevis
70155
Part No.
Description
334-007A (LPH) Performance Hitch Self Leveling
70155
Land Pride Performance Hitch
Figure 2-5
70154
