45
Section 5: Maintenance & Lubrication
11/13/18
RCF3684 Rotary Cutters 326-412M
30890
Ratchet Jack (Optional)
Type of Lubrication: Multi-purpose Grease
Quantity = Until grease purges from threads.
As
Required
Gearbox
Method 1:
Unscrew top vented dipstick (#1). Wipe oil from
dipstick and screw dipstick in without tightening. Unscrew
dipstick and check oil on dipstick. If below bottom level
mark, add recommended gear lube through dipstick hole
until oil reaches top mark on dipstick. Reinstall vented
dipstick and tighten.
Method 2:
Remove side oil plug (#2). If oil is below bottom
of plug hole, add recommended gear lube through top
dipstick hole until oil flows out of side plug hole. Reinstall
and tighten side oil plug (#2) and vented dipstick (#1).
Type of Lubrication: 80-90W EP Gear Lube
Quantity = Fill until oil reaches top mark on dipstick or
begins to flow out side plug hole in gearbox.
NOTE:
Do not overfill! Cutter should be level when
checking oil. Oil expands when hot, therefore, always
check oil level when cold.
30215
Do Not Overfill
IMPORTANT:
This implement is shipped with a
NOTE:
Use a suction or siphon pump to drain
gearbox of oil when there is not an oil drain plug.
8
Hours
