Section 4: Options & Accessories
RC(M)4715 & RCG(M)4715 Rotary Cutters 334-113M
6/3/20
42
Blade Accessories
Land Pride offers three different cutting blade options.
They include High Lift blades, standard blades, and Low
Lift blades. For the removal and installation of cutting
•
High Lift blades:
These blades are great for achieving
grass-cut quality, and cutting at taller cut heights.
However, they are not ideal for trees and heavy brush.
820-724C . . . . . . . . . . . . . . . . . . . Wing CCW rotation
820-725C . . . . . . . . . . . . . . . . . .Center CCW rotation
820-726C . . . . . . . . . . . . . . . . . . . . Wing CW rotation
820-727C . . . . . . . Center CW rotation (not standard)
•
Standard blades:
These blades offer a good
combination of grass-cut quality and the ability to
handle trees and heavy brush.
820-720C . . . . . . . . . . . . . . . . . . . Wing CCW rotation
820-721C . . . . . . . . . . . . . . . . . .Center CCW rotation
820-722C . . . . . . . . . . . . . . . . . . . . Wing CW rotation
820-723C . . . . . . . Center CW rotation (not standard)
•
Low Lift blades:
These blades are great for stemmed
material, trees, and heavy brush. They are also known
to stand up well in conditions that contain gopher
mounds and ant hills. They are not as suitable as High
Lift and standard blades when looking to achieve
grass-cut quality.
820-478C . . . . . . . . . . . . . . . . . .Center CCW rotation
820-479C . . . . . . . . . . . . . . . . . . . Wing CCW rotation
820-480C . . . . . . . . . . . . . . . . . . . . Wing CW rotation
820-544C . . . . . . . Center CW rotation (not standard)
NOTE:
The “CCW” notation refers to counter
clockwise rotation, where as the “CW” notation
refers to clockwise rotation. Rotation direction is
determined by looking down at the deck
Main Drivelines
Land Pride offers two different CAT 6 main drivelines to
best suit your application.
•
CAT 6 constant velocity drivelines allow the operator to
make up to 80 degree turns.
•
CAT 6 constant velocity drivelines with overrunning
clutch have the same features as the CAT 6 constant
velocity driveline plus the overrunning clutch feature.
The overrunning clutch helps protect the tractor’s
power take-off shaft, especially if the tractor has instant
power take-off breaking.
CAT 6 Constant Velocity
826-643C . . . . . . .CAT 6 CV driveline 1 3/8", 540 rpm
826-644C . . . . . . CAT 6 CV driveline 1 3/8", 1000 rpm
826-645C . . . . . . CAT 6 CV driveline 1 3/4", 1000 rpm
CAT 6 Constant Velocity With Overrunning Clutch
826-884C . . . . . . .CAT 6 CV driveline 1 3/8", 540 rpm
826-793C . . . . . . CAT 6 CV driveline 1 3/8", 1000 rpm
Blade Carrier Options
Land Pride offers the following blade carrier options to
choose from when outfitting your Rotary Cutter. Blade
rotation for the options are:
Left-hand deck . . . . . . . . . . . Clockwise blade rotation
Center deck . . . . . . . Counterclockwise blade rotation
Right-hand deck . . . Counterclockwise blade rotation
•
Forged Blade Bar:
This blade carrier option provides critical strength to
the blade mount for consistent, top level performance.
•
Bolt-on Dishpan:
This option includes the forged blade bar with a bolt-on
dishpan. It combines the strength and performance of
the Forged Blade Bar and protection to the gearbox and
blade spindle.
•
Welded Dishpan:
This option includes 1" thick blade bars welded to the
dishpan in a cross pattern. It combines the strength and
performance of the plate blade Bar and protection to
the gearbox and blade spindle.
•
Shredder Kit Option:
This option includes a double stacked shredder blade
configuration on each blade spindle. It is ideal for
cutting residue into smaller pieces.
