Land Pride RC4710, Operator'S Manual

Page: 18 / 72

Section 1: Assembly & Set-up
RC(L)4710 & RCM(L)4710 Rotary Cutters 334-863M 7/31/20
14
Table of Contents
Hitch Types
Shown below are five different hitch options available for
your Rotary Cutter. Visit your nearest Land Pride dealer
to inquire about or purchase a new hitch option.
Swivel Clevis Hitch (Optional)
Refer to Figure 1-2:
The Swivel Clevis Hitch pivots side-to-side up to 35
degrees each direction. It features a stop to prevent the
hitch from being installed upside down. Customer to
supply hitch pin and hitch pin keeper.
LP Performance Hitch (Optional)
Refer to Figure 1-3:
The LP Performance Hitch is a drawbar friendly, self-
leveling hitch that pivots up and down, and side-to-side.
It is held upright with a customer supplied hitch pin to
allow single-person hook up.
Bar-Tite Hitch (Optional)
Refer to Figure 1-4:
The Bar-Tite Hitch functions similar to the LP
Performance hitch except it clamps directly to the
drawbar. The Bar-Tite Hitch is sandwiched between
hardened steel plates to eliminate drawbar wear.
Ball Hitch (Optional)
Refer to Figure 1-5:
The Ball Hitch allows the cutter to swivel about a 2 5/16"
trailer ball mounted to the tractor drawbar. Customer
supplies ball.
Pintle Hitch (Optional)
Refer to Figure 1-6:
The Pintle Hitch allows the cutter to swivel about the
pintle connection. The pintle hitch is ideal for a drawbar
hammer strap.
Swivel Clevis Hitch
Figure 1-2
LP Performance Hitch
Figure 1-3
Bar-Tite Hitch
Figure 1-4
Ball Hitch
Figure 1-5
Pintle Hitch
Figure 1-6
72191
70454
70451
70453
70452