Land Pride RC4615, Operator'S Manual

Page: 31 / 68

Section 1: Assembly & Set-up
Table of Contents
8/22/23 RC4615 & RCM4615 Rotary Cutters 331-644M
27
Unhook Rotary Cutter
Figure 1-25
21. Remove connecting hitch pin or bolt as follows:
a. For Standard Clevis Hitch, See Figure 1-25:
Remove hairpin cotter (#2) and hitch pin (#1).
a. For LP Performance Hitch, See Figure 1-26:
Refer to Detail B: Remove hairpin cotter (#2) and
hitch pin (#1).
b. For Bar-Tite Hitch, See Figure 1-27:
Remove locknut (#2) and bolt (#1).
22. Restart tractor and drive tractor slowly forward
several feet.
23. Shut tractor down properly before dismounting.
24. Lower park jack until cutter is resting on its front skid
shoes.
25. Replace connecting pin/bolt (#1) as follows:
a. For Standard Clevis Hitch, See Figure 1-25:
Insert hitch pin (#1) into clevis hitch as shown.
Secure hitch pin with hairpin cotter (#2).
b. For LP Performance Hitch, See Figure 1-26:
Refer to Detail A: Rotate clevis (#9) horizontal
and flip hitch holder (#11) up so that its holes are
on top as shown. Insert customer-supplied hitch
pin (#1) through holes in hitch holder (#11).
Secure with hairpin cotter (#2).
c. For Bar-Tite Hitch, See Figure 1-27:
Remove hitch (#10) from tractor drawbar and
reattach it to cutter hitch (#9) with removed
bolt (#1) and locknut (#2) Screw locknut on 4 or 5
full turns. Do not torque nut tight.
37605
Unhook Tractor From LP Performance Hitch
Figure 1-26
Unhook Tractor From Bar-Tite Hitch
Figure 1-27
37631
33870