Section 6: Specifications & Capacities
RC3620 & RCM3620 Rotary Cuters 330-841M
9/25/18
54
Section 6: Specifications & Capacities
RC3620 & RCM3620 Models
Specifications & Capacities
Tractor horsepower
70 hp (52.2 kw) to 160 hp (119.3 kw)
Gearbox Horsepower
250 hp (186.4 kw) Splitter
130 hp (96.9 kw) Center & Wing
Gearbox Oil Capacity
5.18 Pints (: Divider Gearbox
6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes
Gearbox Lubrication
Gear Lube 80-90W EP
Cutting Capacity
2" (5.1 cm)
Weights
Total Machine
Tongue Weight
6,680 lbs. (3030 kg) (Front & Rear Single Chain guards, 6 AC tires, CV Driveline, & standard
clevis.)
1,750 lbs
Blade Tip Speed
RC3620
RCM3620
16,000 FPM
16,500 FPM
Hitch Types
Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack
Standard (7,000 lbs.)
Signal Lights
7 Pin connector
LED
SAE J5560 pin configuration
Cutting Width
Overall Width
Minimum Transport Width
20' - 0"
20' - 10"
9' - 11" (With cutting height at 2")
Overall Length
17' - 6" (With cutting height at 2")
Deck Height
13"
Cutting Height*
2" to 12"
Lift Hydraulics
Center Deck
Right Wing
Left Wing
3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Wing Folding Hydraulics
Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings.
Wing Flex
45
o
up, 20
o
Down while cutting.
Deck Material
1 - Piece, 10 gauge.
Side Skirt Material
1/4" plate.
Skid Shoes
Wing Deck
Center Deck
Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
Replaceable: 2 skid shoes
Six Blades (2 per Carrier)
1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift.
Blade Overlap
6"
Blade Bolt
Keyed with hardened flat washer & locknut.
Stump Jumper / Blade Holder
10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar.
Deck Ring
Optional 3/8" formed and welded.
Front & Rear Guards
Optional single chain or double chain.
Input Driveline
ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate & Wing Drivelines
Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
Tire Options
6" x 9 x 21" Laminated tires
29" x 9" Used aircraft tires without foam filling
27" x 7.75" Used aircraft tires with foam filling
Number of Wheels
6 - Wheel option: 4 on transport axle and one on each wing axle.
8 - Wheel option: 4 on transport axle and two on each wing axle.
Standard Transport Axle
Spring-cushioned on center transport axle.
Axle Fasteners
1 1/4" Greasable pins
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
* Maximum cut height is dependent on tire options selected.
