Section 6: Specifications & Capacities
RC3614 & RCM3614 Rotary Cutters 330-918M
1/20/21
55
Section 6: Specifications & Capacities
RC3614 & RCM3614 Models
Specifications & Capacities
Tractor horsepower
70 to 160 hp
Gearbox horsepower
250 hp Splitter
130 hp Center & Wing
Gearbox oil capacity
5.18 Pints: Divider Gearbox
6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes
Gearbox lubrication
Gear Lube 80-90W EP
Cutting capacity
2"
Machine weight
hitch weight
total weight
Chain guards, 5 AC tires and standard clevis.
2,220 lbs.
5,620 lbs.
Blade tip speed
16,500 fpm
Hitch types
Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch jack
Standard (7,000 lbs.)
Signal Lights
7 Pin connector
LED
SAE J5560 pin configuration
Cutting width
Overall width
Minimum transport width
13' - 6"
14' - 9 1/4"
9' - 2 1/2" (With cutting height at 2")
Overall length
17' - 6" (With cutting height at 2")
Deck height
13"
Cutting height*
2" to 12"
Lift hydraulics
center deck
right wing
3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Wing folding hydraulics
3" x 12" single-acting hydraulic cylinder complete with hose & fittings.
Wing flex
45
o
up, 20
o
down while cutting.
Deck material
1 - Piece, 10 gauge.
Side skirt material
1/4" plate.
Skid Shoes
wing deck
center deck
weight box
Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe
Replaceable: 2 Skid shoes
Reversible & replaceable: 1 Skid shoe
4 Blades (2 per carrier)
1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift.
Blade overlap
6"
Blade bolt
Keyed with hardened flat washer & locknut.
Stump jumper / blade holder
10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar.
Deck ring
Optional 3/8" formed and welded.
Front & rear guards
Optional single chain or double chain.
Input driveline
ASAE Cat. 6 with constant velocity u-joint.
Intermediate & wing drivelines
Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
Tire options
6" x 9 x 21" Laminated tires
27" x 7.75" Used aircraft tires with foam filling
29" x 9" Used aircraft tires without foam filling
Number of wheels
5 - Wheel option: 4 on transport axle and one on wing axle.
6 - Wheel option: 4 on transport axle and two on wing axle.
Standard transport axle
Spring-cushioned on center transport axle.
Axle fasteners
1 1/4" Greasable pins
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
* Maximum cut height is dependent on tire options selected.
