Land Pride PATRIOT FDR1648, Operator'S Manual

Page: 20 / 36

Section 2: Accessories & Set-up
Table of Contents
10/26/17
16
Front Roller Assembly
(FDR1648, FDR1660, and FDR1672)
Refer to Figure 2-1:
1. Assemble brackets (#2) and (#3) to deck with
carriage bolts (#4) and flange nuts (#5).
2. Insert roller (#8) between brackets and install pin
(#1) through brackets and roller. Secure with
washer (#6) and cotter pin (#7).
.
Front Roller Assembly
Figure 2-1
20563
Cutting Blades
There are four blade choices to select from based upon
soil condition, density of grass, and tractor horsepower.
The appearance of the finish cut may vary between low
lift and high lift blades. See your Land Pride dealer for
blade availability.
Low Lift Blades
Land Pride’s low lift blades are designed for mowing over
sandy soil terrain where high suction lift is not crucial.
Sand sucked into the blades accelerates blade wear
more than normal. Low lift blades are recommended
because they produce a lower suction keeping sand uplift
and blade wear to a minimum.
Medium Lift Blades (Factory Standard)
Land Pride’s medium lift blades are great when
horsepower is a concern. They produce a medium
suction to lift grass and require less horsepower than
high lift blades.
High Lift Blades
Land Pride’s high lift blades develop the greatest suction
for lifting grass for that fresh clean cut look. However,
they may require more horsepower especially when
cutting tall dense grass. They are not recommended for
sandy soil conditions.
Mulching Blades
Land Pride’s mulching blades are designed to chop
leaves and/or grass into smaller parts leaving your lawn
looking fresher and cleaner than ever before.
Accessory Part Numbers
See your Land Pride dealer for blade availability.
Land Pride Part Numbers & Descriptions
Part No. Part Description
Front Roller Assembly
315-516S FDR1648, FDR1660 & FDR1672
Low Lift Blade
(3 blades required per mower)
890-323C FDR1648
890-204C FDR1660
890-200C FDR1672
Medium Lift Blade
(3 blades required per mower)
890-325C FDR1648
890-375C FDR1660
890-318C FDR1672
High Lift Blade
(3 blades required per mower)
890-219C FDR1648
890-171C FDR1660
890-172C FDR1672
Mulching Blade
(3 blades required per mower)
890-700C FDR1648
890-702C FDR1660
890-698C FDR1672
Section 2: Accessories & Set-up