21
Section 2: Operating Instructions
MPS2607, MPS2609, & MPS2611 Multi-Purpose Seeder 329-301M
Table of Contents
8/8/23
•
Do not use implement to lift objects; to pull objects such as
fence posts, stumps, etc; or to push objects. The unit is not
designed or guarded for these uses.
•
Do not use implement as a man lift or work platform. It is
not properly designed or guarded for this use.
•
Never make contact with underground utilities such as
electrical power lines, gas lines, phone lines, etc. They can
cause serious injury or death from electrocution, explosion,
or fire. Always call 811 (USA) or local utility companies
before digging so that they can mark the location of
underground services in the area. For contact information,
see Dig Safe in the “Important Safety Information” starting
on page 1.
•
Avoid exposure to dust containing crystalline silica
particles. This dust can cause serious injury to the lungs
(silicosis). Because crystalline silica is a basic component
of sand and granite, many activities at construction sites
produce dust containing crystalline silica. Trenching,
sawing, and boring of material containing crystalline silica
can produce dust containing crystalline silica.
CAUTION
!
To avoid minor or moderate injury:
•
Do not use front spike rollers, rear roller, or tires as a step.
They can move suddenly causing a falling hazard against
metal protruding objects even when they appear to be solid
against the ground.
•
Do not step or climb on the frame, rollers, or optional
wheels to fill the grass seedbox. Climbing on the seeder to
fill the seedbox can result in a falling hazard.
•
Use lid over center lock when lid is in the up position. Keep
others away when raising or lowering the lid and keep all
body parts out of the way when lowering the lid. The lid
could come down on body parts.
Tractor Shutdown Procedure
The following are basic tractor shutdown procedures.
Follow these procedures and any additional shutdown
procedures provided in your tractor Operator’s Manual
before leaving the operator’s seat.
1.
Reduce engine speed and disengage power take-off
if engaged.
2.
Park tractor and implement on level, solid ground.
3.
Lower implement to ground or onto non-concrete
support blocks.
4.
Put tractor in park or set park brake, turn off engine,
and remove switch key to prevent unauthorized
starting.
5.
Relieve all hydraulic pressure to auxiliary hydraulic
lines.
6.
Wait for all components to come to a complete stop
before leaving the operator’s seat.
7.
Use steps, grab-handles and anti-slip surfaces when
stepping on and off the tractor.
