background image

Section 2: Operating Procedures 

Series: GB25, GBE25, and GBE30 Grapple Buckets 380-192M

6/17/21

19

Table of Contents

Transport Safety

DANGER

!

To avoid serious injury or death:  
Keep attachment, loader arms, and/or load away from 

overhead electrical power lines. Place an orange warning 

sign under overhead lines indicating type of danger above.

WARNING

!

To avoid serious injury or death:  

Follow all safety precautions when transporting a load. Not 

using safe transporting methods can damage the equipment 

and cause serious injury or death.

Always transport loads as close to the ground as possible 

without hitting objects. A load carried high could shift 

causing the load to fall, tipping of the machine, and/or loss 

of control.

Always travel straight up and straight down inclines. Never 

make turns on the incline.

Transporting loads across inclines, over ramps, on bumpy, 

soft, or slippery surfaces reduces machine stability and lift 

capacity. Transporting and lifting loads under these 

conditions is extremely dangerous. Follow all transport 

instructions in your power machine Operator’s Manual.

When traveling on public roadways, travel in such a way 

that faster moving vehicles may pass safely. Use accessory 

lights, clean reflectors, and a slow moving vehicle sign that 

is visible from the back to warn operators in other vehicles 

of your presence. Always comply with all federal, state, and 

local laws.

Grapple Bucket Operation

Picking Up A Load

WARNING

!

To avoid serious injury or death:  

Keep bystanders at a safe distance when entering and 

picking up a load. Objects can shift or be thrown suddenly 

as the attachment makes contact with load causing serious 

injury or death.

Enter pick-up zone carefully making sure no object will 

come through or pass the attachment into the operator’s 

space.

1. Be sure to read and understand all safety alerts 

under 

“Operating Safety” 

on page 17.

IMPORTANT: 

Do not ram attachment into a pile or 

hook a chain to the attachment to secure a load. 

Doing so can damage the attachment.

IMPORTANT: 

Close upper jaw with care when lifting 

fragile or hollow objects such as a crate. This will 

help protect the object from being crushed.

2. Make sure the load does not exceed the rated lift 

capacity of the tractor loader lifting the load.

3. Check for overhead obstructions.
4. Center bucket on the load to be picked up.
5. Make a complete stop in front of the load and position 

the bucket at the proper height to enter the load.

6. Fully open grapple tines and slowly drive into the 

load. Do not ram bucket into the load.

7.

Close grapple tine to secure the load.

8. Lift load a few inches and tilt it back slightly. 
9. Make sure you have good control of the load. If the 

load is not secure, release and recapture the load in 

a more secure location.

10. Back load out slowly making sure the load clears all 

other obstacles.

11. Not always will the load be secured properly in the 

bucket when pulled free from a pile. Before traveling 

with a loose load, lower the load to the ground, 

release it, and re-capture it to make it more secure.

12. Position the load at a safe, low traveling height before 

transferring it to the unloading site.

Traveling With A Load

1. Be sure to read and understand all safety alerts 

under 

“Transport Safety” 

on page 19.

2. Pedestrians always have the right-of-way.
3. Keep load tilted slightly back.
4. When possible, travel with bucket and load kept low 

to the ground.

5. Continually scan all sides for pedestrians, other 

traffic, and obstacles. 

6. If the load is large and blocks your view, travel in 

reverse.

7.

Always drive at a safe speed and slow down when 

going around corners. Avoid sudden braking.

8. Leave enough clearance when turning so that the 

bucket and load does not contact obstacles such as 

vehicles, buildings, trees, or fences. 

9. When traveling over a ramp or incline, keep load on 

the “uphill” side of the tractor.

10. When possible, travel straight up and down grades, 

ramps, and inclines. Avoid making turns on grades, 

ramps, and inclines.

11. Raise or lower the load only when stopped, never 

while traveling.

12. Slow down when traveling over rough or hilly terrain.
13. Do not transport loads on public roadways. 
14. Transport on public roadways without a load and 

transport in such a way that faster moving vehicles 

may pass you safely.

15. Plan your route to avoid heavy traffic.

Summary of Contents for GB25 Series







































Reviews: