background image

6

Introduction 

FSP500, FSP700 & FSP1000 Broadcast Spreaders 309-065M

Table of Contents

11/29/18

Introduction

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service

The parts on your Broadcast Spreader have been 
specially designed by Land Pride and should only be 
replaced with genuine Land Pride parts. Contact a Land 
Pride dealer if customer service or repair parts are 
required. Your Land Pride dealer has trained personnel, 
repair parts, and equipment needed to service the 
implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new 
Broadcast Spreader. If for any reason you do not 
understand any part of this manual or are not satisfied 
with the service received, the following actions are 
suggested:

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

15594

Land Pride welcomes you to the growing family of new 
product owners. This Broadcast Spreader has been 
designed with care and built by skilled workers using 
quality materials. Proper assembly, maintenance, and 
safe operating practices will help you get years of 
satisfactory use from this product

Application

The Land Pride FSP500, FSP700, and FSP1000 are 
rotary/spin type broadcast spreaders designed for 
Category 1, three-point hitch mounting. They are capable 
of spreading seed, sand, salt, top dressings, lime, prilled/
granular fertilizer, and most all other types of granular 
materials at delivery rates ranging from 43-890 lbs. per 
acre and 49 to 998 kgs/hectare. (Depending on material) 
Agitator extension comes standard. Each of these 
models offer specific hopper capacities with the FSP500 
at 350lbs/5.85cu. ft., FSP700 at 563lbs/9.38cu. ft., and 
FSP1000 at 673lbs/11.22cu. ft.

The spread rate capability and range of hopper 
capacities make the Land Pride Broadcast Spreaders 
well suited for applications on farms, golf courses, food 
plots, park systems, athletic fields, and large campuses. 
They also work well for smaller municipal or commercial 
applications of salt and sand for snow and ice control.

See 

“Specifications & Capacities” 

on page 24 and 

“Features & Benefits”

 on page 25 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation.

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Terminology

“Right” or “Left” as used in this manual is determined by 
facing forward in the direction the machine will operate 
while in use unless otherwise stated.

Definitions

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

Summary of Contents for FSP700

































Reviews: