Section 1: Assembly & Set-up
1/3/23
CB0654 4-in-1 Combination Bucket 381-218M
12
Unhook Combination Bucket
DANGER
!
To avoid serious injury or death:
A crushing hazard exists when hooking-up and unhooking the
attachment. Do not allow anyone to stand between attachment
and power machine while approaching or backing away from
the attachment. Do not operate hydraulic controls while
someone is near the power machine and/or attachment.
WARNING
!
To avoid serious injury or death:
•
Store attachment in a secure position on solid, level ground
with front jaw fully closed. If stored improperly, the
attachment can easily tip over onto a person.
•
Hydraulic fluid under high pressure will penetrate the skin
or eyes causing a serious injury. Wear protective gloves and
safety glasses or goggles when working with hydraulic
systems. Use a piece of cardboard or wood rather than
hands when searching for leaks. If an accident occurs, seek
immediate emergency medical care or gangrene may result.
Refer to Figure 1-3:
on page 20 when parking
the bucket for long periods or at the end of the
season.
2. Park tractor on a flat level solid surface.
3. Shut tractor down according to
4. With bucket resting on the ground, operate hydraulic
control lever back and forth to release hydraulic
pressure to the attachment.
5. Unhook hydraulic hoses from the bulkhead and store
them on the bucket.
6. Pull lock handles up on the loader hitch to remove lock
pins from the bottom slots in the bucket hitch plate.
7.
Start tractor and slowly rotate top of loader hitch plate
forward while slowly backing the tractor away from
the bucket until the loader hitch plate and bucket
have separated.
8. Continue to carefully back away from the bucket until
clear of the bucket.
Kubota Quick Attach Hitch Unhook
Figure 1-3
Top Angle Bars
Top of Loader
Hitch Plate
Lock Handles
Lock Pins
Bottom Slots
Quick Connect Couplers
76953
