Introduction
2/5/19
CB0550 4-in-1 Combination Bucket 381-139M
6
Introduction
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your 4-in-1 Combination Bucket have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
attachment.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, seeFigure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
4-in-1 Combination Bucket. If for any reason you do not
understand any part of this manual or are not satisfied
with the service received, the following actions are
suggested:
1.
Discuss any problems you have with your attachment
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
39627
Land Pride welcomes you to the growing family of new
product owners. This 4-in-1 Combination Bucket has
been designed with care and built by skilled workers
using quality materials. Proper assembly, maintenance,
and safe operating practices will help you get years of
satisfactory use from this product.
Application
The Land Pride 4-in-1 Combination Bucket, Model
CB0550, is designed exclusively for attaching to Kubota
60 & 70 Series BX tractors with a front loader. It has uses
and applications in farming, ranching, hobby farming,
landscaping, nurseries, small orchards, small vineyards,
resorts, campuses, and parks. Use your BX tractor with
attached bucket to move dirt, sand, gravel, and other
loose materials as follows:
•
Use bucket with the jaw closed to load and carry
material. Tilt bucket or open jaw to dump material.
•
Fully open jaw to use bucket as a dozer to dig, move,
and backfill. Close jaw to capture a load.
•
Fully open jaw and tilt bucket face down to use jaw for
digging, scraping, leveling, and finish grading.
•
Use jaw as a grapple to pick up materials such as
rocks, tree branches, sticks, loose hay, silage, and
manure.
The spill guard at the back of the bucket adds capacity
and helps hold loose materials in the bucket while picking
up a load and transporting a load.
BX Kubota tractor users will find this Land Pride
attachment saves time and money while getting that
material handling job done a whole lot easier.
See
“Specifications & Capacities”
“Features & Benefits”
on page 20 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
NOTE:
A special point of information that the
operator should be aware of before continuing.