Land Pride BB4510, Operator'S Manual

Page: 17 / 32

Section 1: Assembly & Set-up
BB4596, BB4510, & BB4512 Pull Type Drag Scraper 306-096M 11/28/18
13
Table of Contents
Weight Box Assembly (Optional)
Refer to Figure 1-10:
1. Attach weight box (#1) to the standard axle or tilt axle
by inserting 1/2"-13 x 1 1/4" GR5 hex head cap
screws (#2) in from the top of the weight box.
2. Secure cap screws with flat washers (#5), lock
washers (#4), and hex nuts (#3). Tighten hex nuts to
the correct torque.
IMPORTANT: The weight box can be filled level full
of concrete. Make sure in assembly that the heads
of cap screws (#2) are inside the box and that the
nuts are outside the box for easy removal when full
of concrete.
Standard Axle Assembly
Figure 1-10
27989