Land Pride BB4510, Operator'S Manual

Page: 12 / 32

Section 1: Assembly & Set-up
BB4596, BB4510, & BB4512 Pull Type Drag Scraper 306-096M 11/28/18
8
Table of Contents
Wheel Installation
(BB4596 & BB4510 Only)
Refer to Figure 1-3:
Models BB4596 and BB4510 are shipped with one of the
wheels removed for crating purposes.
1. Attach removed wheel (#7) to hub (#8) with lug
nuts (#9).
2. Tighten lug nuts to the correct torque.
Weight Box Removal (Optional)
Refer to Figure 1-3:
If included, weight box (#1) is shipped assembled to the
underside of the axle frame (#2) and will need to be
removed before attaching axle frame to the scraper.
1. Turn axle frame (#2) upside down as shown so that
the weight box (#1) is on top. (Standard axle shown in
illustration)
Attach Wheel and/or Remove Optional Weight Box (Standard Axle Shown)
Figure 1-3
30146
NOTE: If included, weight box (#1) is shipped
assembled to the underside of the axle frame (#2) and
will require removal before attaching axle frame to the
scraper frame.
Refer to Figure 1-2:
5. Remove axle frame from the crate. If included, be
careful not to bump tilt cylinder elbow (#1) against the
scraper mainframe while lifting the axle frame.
Cylinder Elbow Clearance
Figure 1-2
1
30145