background image

Section 1: Assembly & Set-up 

Table of Contents

 BB3578, BB3584, & BB3596 Fixed Bar Box Scraper 303-398M

11/7/18

7

3-Point Hook-up

Refer to Figure 1-2:

DANGER

!

To avoid serious injury or death:  
A crushing hazard exists while hooking-up and unhooking 

implement. Keep people and animals away while backing-up 

to implement or pulling away from implement. Do not operate 

hydraulic controls while a person or animal is directly behind 

the power machine or near the implement.

WARNING

!

To avoid serious injury or death:  
Always shut tractor down using “Tractor Shutdown 

Procedure” provided in this manual before dismounting 

tractor. Refer to 

“Tractor Shutdown Procedure” 

on page 

9.

A 3-point Category I or II hitch is required. The lower 
3-point arms of the 3-point hitch must be stabilized to 
prevent side-to-side movement. Most tractors have sway 
blocks or adjustable chains for this purpose.

NOTE:  

Land Pride’s Quick Hitch can be attached to 

the  tractor to provide  quick and easy 3-point hook-

up and detachment. See  your nearest Land Pride 

dealer to purchase  a  Quick-Hitch.

1.

Ensure lower 3-point lift arms are blocked to prevent 
excessive side-to-side movement.

2. Slowly back tractor up to the Box Scraper while using 

tractor’s 3-point control lever to align lower 3-point 
hitch holes with clevis lug holes on the Box Scraper.

Cat. I hook-up: Align lift arms with inside clevises.

Cat. II hook-up: Align lift arms with outside 
clevises.

3. Shut tractor down using correct shutdown 

procedures before dismounting tractor. Refer to 

“Tractor Shutdown Procedure” 

on page 9.

4. Attach lower 3-point arms to the clevises with hitch 

pins (#1). Secure hitch pins with linchpins (#2).

5. Connect top center 3-point link to the upper hitch with 

hitch pin (#3). Secure hitch pin with hairpin 
cotters (#4).

6. Return to the tractor and slowly operate tractor 

3-point hydraulic control lever to slowly raise and 
lower the Box Scraper while checking for clearance 
between tractor tires, drawbar, and Box Scraper. 
Move or remove drawbar if it interferes with the Box 
Scraper.

7.

Level the scraper left to right and front to back. Refer 
to 

“Leveling and Pitch Adjustment” 

on page 11.

Tractor 3-Point Hitch

Figure 1-2

37298

39254

Summary of Contents for BB3578























Reviews: