30
Section 5: Maintenance and Lubrication
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
7/28/06
Land Pride
Table of Contents
Storage
At the end of the working season or when the mower will
not be used for a long period, it is good practice to clean
off any dirt or grease that may have accumulated on the
mower and any of the moving parts. It may be necessary
to scrape off compacted dirt from the bottom of the deck,
then use a garden hose to thoroughly clean the surface.
Check the blades for wear and replace, or sharpen, if
necessary, refer to “Blade Sharpening”, this section,
on page 25.
Inspect the mower for loose, damaged or worn parts and
adjust or replace if needed.
Lubricate as noted in the Lubrication portion of this
section starting on page 23.
Release spring tension from drive belt, refer to “Blade
Removal And Installation” on page 24.
Repaint parts where paint is worn or scratched to prevent
rust. Aerosol touch-up paint is available from your Land
Pride dealer. Order Land Pride part #821-011C for
Buckskin or 821-002C for Black.
Store mower in a clean, dry place.
Tires With Air Pressure
Tire Sealant: Heavy Duty tire sealant has been added in
Air tires to help reduce air loss from punchers due to
nails/thorns etc.... See tire sidewall for optimum tire
pressure.
NOTE: Under inflated tires can roll off of rim.
Maintaining air pressure within 5 PSI of maximum
tire pressure reduces the risk of tires rolling off of
rim.
