Section 3: Operating Instructions
AFM3011 All-Flex Grooming Mower 315-783M
3/21/19
30
Unhook Mower
Refer to Figure 3-6:
1.
on page 39 before
parking mower for a long period.
2.
Shutdown tractor before dismounting. Refer to
3.
Move hydraulic control levers back and forth several
times to relieve all hydraulic pressure in hydraulic
hoses and at the couplers.
4.
Remove park jack (#1) from storage mount (#14) and
attach to mount (#15). Secure with detent pin (#2).
Make sure detent pin is fully inserted.
5.
Adjust park jack (#1) until hitch weight is removed
from tractor drawbar.
6.
Unhook wire harness (#10) from the tractor electrical
outlet. Coil wire harness up and store on the spring
hose loop (#12). Keep wire harness pin connector
out of the dirt.
7.
Unhook hydraulic hoses (#9) from tractor duplex
outlet. Insert couplers through spring hose loop to
keep couplers out of the dirt.
8.
Remove driveline safety chain (#16) from the tractor.
9.
Pull back on driveline lock collar (#7) and pull
driveline (#6) from tractor power take-off shaft.
10. Collapse driveline (#6) by pushing tractor end of
driveline toward the splitter gearbox.
11. Store driveline (#6) so that the yoke end is not in the
dirt.
12. Unhook transport safety chain (#8) from the tractor
and stow on the hitch.
13. Remove hitch pin keeper (#5) and hitch pin (#4).
14. Start tractor and slowly drive forward several feet
while watching to make sure no mower components
are connected to or catching on the tractor.
15. Shutdown tractor before dismounting. Refer to
16. Replace hitch pin (#4) in mower hitch clevis (#3).
Secure hitch pin keeper (#5).
Refer to Figure 3-4 on page 29:
17. Remove slow moving vehicle sign (#1) from
mounting bracket (#2).
18. Reinsert slow moving vehicle sign in mounting
bracket on the back of the tractor.
Unhook Mower
Figure 3-6
72282
