Land Pride 3P1006NT Operator'S Manual Download Page 46

Page: 46 / 92

Maintenance and Lubrication

Table of Contents

3P1006NT 313-521M

2019-07-18

Caster Brake Adjustment

Refer to Figure 27

The rear lift

assist wheels each have independent

adjusters for the caster pivot. The adjustments will vary

depending on different field

field conditions as well as

road transport conditions.

If the caster is oscillating during transport turns or in field

use, adjust the pressure plate bolt .

Refer to Figure 28

The factory setting for both adjustments is 1

in. (4.4 cm) from the face of the bolt head to the top of

the weldment, this measurement is a starting point and

will need to be fine tuned from field

field as conditions

vary. Depending on conditions, adjustment may be

needed to go from field to road transport. If caster brake

components are ever replaced, return the bolts to the

factory setting.

Pressure Plate Adjustment

1. Loosen the jam nut .
2. Turn the bolt clockwise until the spring is fully

compressed.

3. Back the bolt out

in. (6 mm).

4. Tighten the jam nut.

Caster Pressure Plate and Tube:

The tube acts as a pivot brake , and helps prevent

caster oscillation during transport.

Figure 27

Rear Caster Adjustments

32058

Figure 28

Rear Caster Adjustment Bolts

(left side shown)

32059

in.

4.4 cm

Summary of Contents for 3P1006NT





























































































Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands

Land Pride 3P1006NT, Operator'S Manual

Search results

Summary of Contents for 3P1006NT

Reviews:

Related manuals for 3P1006NT

Brands by name

Popular brands