![background image](http://html.mh-extra.com/html/land-pride/380-152a/380-152a_installation-instructions-manual_673010003.webp)
Assembly Instructions
7/26/22
#380-152A & #380-336A Installation Instructions Manual No. 380-153M
3
Valve Location
Figure 2
Loader Valve
Figure 3
Outlet Block (#42) located under tractor platform
Figure 4
A
B
2
13
12
11
9
10
37117
43
44
74883
41 / 13
42
P1
74884
41 / 12
Connect to Power Beyond Ports
1. Locate and remove green line hydraulic hose (#41)
that connects power beyond port “P1” to elbow (#44)
located on loader valve (#43). Discard hose (#41).
Refer to Figure 1 on page 2, Figure 3, & Figure 4:
2. Connect hydraulic hose (#13) from “P” port to elbow
(#44) at loader valve (#43). Tighten hydraulic hose to
the elbow.
3. Connect hydraulic hose (#12) from “T” port to
port “P1” at outlet block (#42). Tighten hydraulic hose
to port “P1”.
4. Secure hoses (#12 & #13) to tractor as needed with
cable ties (#3).
5. Check tractor hydraulic fluid level. If low, add
recommended hydraulic fluid. Refer to your tractor
Operator's Manual for recommended hydraulic fluid
and procedure for checking hydraulic fluid level.
IMPORTANT:
Land Pride recommends that your
dealer connect hydraulic hoses (#12 & #13) to your
tractor’s power beyond port and loader valve port.
Improper hook-up could cause damage to your
tractor.
IMPORTANT:
DO NOT connect hydraulic hoses
(#12 & #13) to the loader valve and power beyond
port if the outer block feeds equipment mounted on
the back of the tractor such as a backhoe. The
instructions below do not apply in this situation.
Have your nearest dealer hook-up these hoses.
Improper hook-up can damage your tractor.