© Copyright 2019
Printed
1
Before You Start
Your BX Third Function Valve Kit
is exclusively designed
for your Kubota 60 & 70 series BX tractors. Please read
these installation instructions thoroughly before
assembling this kit to your Kubota tractor and loader.
Especially read information relating to safety concerns.
Additional information on operation, maintenance, and
troubleshooting can be downloaded free of charge from
our website at www.landpride.com. Download Land Pride
Operator’s Manual for the following models:
SGC0548. . . . . . . . . . . . . . . . . . . . . . . . . . . 380-138M
CB0550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381-139M
A detailed listing of parts for this accessory kit is provided
on page 4. Keep this manual for ordering replacement
parts from your nearest Land Pride dealer. This manual
can also be downloaded free of charge from our web site
at www.landpride.com. Download manual 380-145M.
General Information
These assembly instructions apply to the following BX
Third Function Valve Kit listed below:
380-137A
VALVE KIT, BX THIRD FUNCTION
Further Assistance
Your dealer wants you to be satisfied with your new BX
Third Function Valve Kit. If you do not understand any
part of this manual, or are not satisfied with the service
received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure that person is aware of your
questions/problems and has had the opportunity to
assist you.
2.
If you are still not satisfied, explain the problem to the
owner or general manager of the dealership.
3.
For further assistance write to:
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of others
depend on it!
!
IMPORTANT:
Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
To see color training photos on Dealer Access, select
“Dealer Training” under PARTS SUPPORT and
look for “Third Function Valves.”
Land Pride Service Department
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address: [email protected]
Assembly Instructions
Assembly Instructions
A detailed listing of parts for this kit is provided on page 4
as a checklist to inventory parts received. Please contact
your local Land Pride dealer for any missing hardware.
Initial Preparations
The steps listed below must be followed before installing
this kit:
1.
Park tractor on a flat surface, Place gear shift lever in
park, turn off engine and remove ignition key.
Valve Assembly
Figure 1
Valve Assembly
Refer to Figure 1 & Figure 2 on page 2:
1.
Attach valve assembly support bracket (#2) to
existing hole “A” in tractor platform with 5/16" x 1" bolt
(#6) and hex whiz nut (#8). Tighten hex whiz nut to 17
ft-lbs.
2.
Route hydraulic hoses (#13 & #17) left of mounting
bracket (#2) and down beneath tractor platform.
A
2
4
4
8
6
12
35837
19
18
13
17
For Kubota 60 & 70 Series BX Tractors
BX Third Function Valve Kit 380-137A
Assembly Instructions
Manual No. 380-145M
5/3/19
