7
Introduction
1/29/14
RCR2684 Rotary Cutter 312-785M
Table of Contents
Introduction
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 35. Always provide model
and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
30838
Land Pride welcomes you to the growing family of new
product owners. This Rotary Cutter has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this machine.
Application
The medium duty RCR2684 Rotary Cutter is built and
designed by Land Pride for cutting on gently sloping
or slightly contoured right-of-ways, pastures, set aside
acres, and row crop fields. Its 84" cutting width makes
it compatible with the more maneuverable and lower
60 to 130 horsepower tractors with 540 rpm PTO and
category II or III three point hitches and is Quick-Hitch
adaptable. The driveline is protected with a 4 plate slip
clutch.
The cutter clears grass, weeds, and light brush up to
3" in diameter and has a cutting height range of 2" to 12"
with a cutting blade tip speed of 14,370 FPM. This unit
comes with a standard 3/16" x 27" heavy-duty oval stump
jumper and replaceable skid shoes. Optional rubber
deflectors or chain guard selections are available.
See “Specifications & Capacities” on page 30 and
“Features & Benefits” on page 32 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
