LANCOM OAP
-
54 Wireless and LANCOM OAP
-
310agn Wireless
Chapter 7: Options and accessories
86
EN
Before mounting external antennas, please observe the information
on lightning protection in the LANCOM Outdoor Wireless Guide (sup-
plied or available as a download from
). Mounting
antennas without adequate lightning protection could lead to serious
damage to the access point and the network infrastructure connected
to it.
LANCOM OAP-
310agn Wireless
To install an optional AirLancer antenna, switch the device off by unplugging
the power cable. Now carefully unplug the diversity antennas by unscrewing
them. Connect the AirLancer antennas to the antenna connectors marked
'ANT 1' and 'ANT 2'
or
'ANT 1' and 'ANT 3'. Each unused antenna connector
is to be deactivated with a terminator (supplied).
LANCOM OAP-54
Wireless
To install optional AirLancer antennas, switch the device off by unplugging the
LAN cable that supplies the power. Carefully unscrew the two diversity anten-
nas from the top of the device (first wireless module). Connect the AirLancer
Extender antenna to the 'Antenna Main' connector.
In most cases, the connections between the LANCOM OAP-54
Wireless and the AirLancer Extender antennas require the use of an
adapter cable from "Reverse N" to "N". With this adapter cable it is
Please note the following when connecting antennas:
Antenna connector 1 must always be used. Depending on the
model, mounting and cabling, the second antenna may be connec-
ted either to connector 2 or connector 3.
The configuration of the device software must agree with the actual
antenna connections.
Power LAN WLAN
-1
WLAN
-2
WAN Message
'Antenna Main' connector
for the first wireless module
'AUX' connector for
the first wireless
module
