LANCOM OAP
-
54 Wireless and LANCOM OAP
-
310agn Wireless
Chapter 2: Installation
26
EN
The following can be displayed for WLAN link:
WLAN Data
(LANCOM
OAP-310agn
Wireless only)
Provides information about the data traffic at the internal WLAN module.
The following can be displayed for WLAN data:
WAN
Connection status of the WAN interface. The WAN link display can assume
three states:
Off
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
Yellow
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Yellow
Inverse flashing
Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the received signal strength of a P2P link or the received
signal strength from an access point, to which this
device is connected in client mode.
Yellow
Blinking
DFS scanning or other scan procedure.
Yellow
Flickering
TX data traffic.
off
Not connected
green
constantly on
Connection established
green
inverse flashing
Data transfer via WAN
