LANCOM L
-
54g Wireless - LANCOM L
-
54ag Wireless - LANCOM L
-
54 dual Wireless
Chapter 2: Installation
14
EN
The LANtools also require a Windows operating system. A web
browser under any operating system provides access to WEBconfig.
2.2.2
Operating access points in managed mode
LANCOM Wireless Routers and LANCOM Access Points can be operated either
as self-sufficient Access Points with their own configuration ("Access Point
mode“) or as components in a WLAN infrastructure, which is controlled from
a central WLAN-Controller ("managed mode").
For operation in managed mode the Access Points require firmware of
version 7.22 or higher and a current loader (version 1.86 or higher).
2.3
Status displays, interfaces and hardware installation
2.3.1
Status displays
Front side
The LANCOM L-54ag Wireless and LANCOM L-54g Wireless have status dis-
plays on the front panel.
LANCOM L-54 dual
Wireless
LANCOM L-54g
Wireless
LANCOM L-54ag
Wireless
Top panel
Two additional LEDs on the top panel provide a convenient overview of the
most important status information, especially when the device is mounted
vertically.
L-54 dual Wireless
Power
ETH 1
WLAN 1 Link
WLAN 2 Link
ETH 2
L-54ag Wireless
Power
LAN Link
WLAN Link
WLAN Data
LAN Data
