|
Providing dial-up access
45
|
LANCOM Office
|
EN
The connection is not established automatically. The RAS user must manually
establish a connection to the LANCOM Office via Dial-Up Networking first.
When connected, they can search for and access computers in the remote
network (via
Find / Computers
, not through the Network Neighborhood).
7.2
Settings for the dial-in computer
A number of settings must be configured on the dial-in computer. These are
briefly listed here, based on a Windows computer:
•
Dial-Up Networking (or another PPP client) must be correctly configured
•
Network protocol (TCP/IP, IPX) installed and bound to the dial-up adapter
•
New connection in Dial-Up Networking with the call number of the router
•
Terminal adapter or ISDN card set to PPPHDLC
•
PPP selected as the Dial-Up server type, 'Enable software compression'
and 'Require data encryption' unchecked
•
Select desired network protocols (TCP/IP, IPX)
•
Additional TCP/IP settings:
•
Assignment of IP address and name server address enabled
•
'IP header compression' disabled
These settings will permit a PC to dial into a remote LAN via ISDN and access
its resources in the usual manner.
7.3
Instructions for
LANconfig
a
Launch the 'Provide Dial-In access (RAS)' wizard. Follow the wizard's
instructions and enter the required information.
Summary of Contents for DSL/I-1611
Page 1: ...LANCOM TM Office series...
Page 47: ...Providing dial up access 47 LANCOM Office EN...
Page 60: ...Technical data LANCOM Office 60 EN...
Page 62: ...Annex LANCOM Office 62 EN...