LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 3: Basic configuration
36
EN
In the following 'Security settings' window, specify a password for config-
uration access. Note that the password is case-sensitive and ensure that
it is sufficiently long (at least 6 characters).
You may specify whether the device may only be configured from the local
network or whether remote configuration via the WAN (i.e. a remote net-
work) is also permissible.
Please note that enabling this will also permit remote configuration
via the Internet. You should always make sure that the configuration
access is suitably protected, e.g. with a password.
Remote configuration via a direct ISDN connection is available independ-
ently of the WAN remote configuration: in this case, the configuration PC
establishes a direct dial-up ISDN connection to the LANCOM router, for
example using Windows Dial-Up Networking. ISDN remote configuration
can be enabled by specifying an MSN/terminal device selection digit for
it. In this case, the LANCOM router will accept calls on that MSN/terminal
device selection digit and can be remotely configured via the ISDN con-
nection.
Confirm your selection with
Apply
.
In the next window, select your DSL provider from the list that is displayed.
Confirm your choice with
Apply
.
If you select 'My provider is not listed here,' you must enter the transfer
protocol used by your DSL provider manually in the next window. Confirm
your choice with
Apply
.
Entering the password in the web browser
When you are prompted for a user name and password
by your web browser when accessing the device in the
future, enter your personal values to the corresponding
fields. Please note that the password is case-sensitive.
If you are using the common configuration account,
enter the corresponding password only. Leave the user
name field blank.
Entering the configuration password
