Lancia Y, Owner'S Handbook Manual

Page: 101 / 191

98
G
– Take out the tools and remove the
space-saver spare wheel.
IMPORTANT The indications
which follow must be complied with
to ensure that the jack and the spare
wheel are used correctly.
It must be remembered that:
– the jack weighs 1.85 kg;
– the jack does not require adjust-
ments;
– the jack cannot be repaired. If it
breaks, it must be changed with an-
other new jack;
– only the jack handle described in
this chapter can be fitted onto the
jack.
3. CHANGING THE WHEEL
1) Remove the wheel cup with a
screwdriver (LS versions).
2) Loosen the wheel bolts of the
wheel to be changed by about 1 turn.
3) If the car is fitted with alloy rims,
shake the car to facilitate removing
the rim from the wheel hub.
4) Turn the jack handle C so that
the jack opens partially.
5) Place the jack at the point marked
by a notch H (fig. 3) near the wheel to
be changed at approximately 10 cm
towards the centre of the car
(fig. 3) .
6) Turn the handle C to open the
jack until the jack groove is correctly
inserted in the sidemember ribbing.
7) Warn any other people present
that the car is going to be lifted. Other
people must stay clear and not touch
the car until it is back on the ground.
8) Turn jack handle and lift the ve-
hicle until the tyre is a few centime-
tres above the ground.
The jack handle must turn freely,
without touching the ground to avoid
scraping your hand.
Do not touch moving parts of the
jack (screws and joints) as they can
cause injuries. If you dirty your hands
with grease, clean them carefully.
9) Undo the 4 bolts completely and
remove the wheel cover (
N
version)
and wheel.
fig. 6
P4C00161
fig. 7
P4C00403
4C090-119 ING 11-03-2008 12:00 Pagina 98