23
SAFETY
ST
AR
TING
AND DRIVING
W
A
RNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
CONTROL BUTTONS fig. 25
+
To scroll the menu and the next
options or to increase the dis-
played value.
MODE
Press briefly to access the
menu and/or go to next
screen or to confirm the re-
quired menu option.
Hold pressed to go back to
the standard screen.
–
To scroll the menu and the previ-
ous options or to decrease the dis-
played value.
NOTE Buttons
+
and
–
activate dif-
ferent functions according to the fol-
lowing situations.
❒
Hold button
MOD
E pressed for
longer than two seconds to con-
firm the change made to the time.
Setting the buzzer volume
To set the desired volume, proceed as
follows:
❒
repeatedly press
MODE
to display
“
bUZZ
”;
❒
press
+
to increase the volume;
❒
press
–
to decrease the volume;
❒
Hold button
MOD
E pressed for
longer than two seconds to con-
firm the change made.
Setting the speed limit
A speed limit can be set and the sys-
tem will inform the drive when the
limit is exceeded by means of an in-
dication on the display and the
buzzer. Proceed as follows to set:
This function is “
OFF
” when the car
is delivered.
SET-UP MENU
The “Set-up Menu” is used for the
following adjustments and/or settings:
❒
SETTING THE CLOCK
❒
SETTING THE BUZZER VOL-
UME
❒
SETTING THE SPEED LIMIT
❒
SETTING THE UNIT OF MEA-
SUREMENT.
Setting the clock
The clock is set to 24 hours when the
car is delivered.
Proceed as follows to set the required
time:
❒
repeatedly press
MODE
to display
“Hour”;
❒
press
+
to increase one minute;
❒
press
–
to decrease one minute;
Hold buttons
+
or
–
pressed for a few
seconds to run the clock forwards or
backwards rapidly until the buttons
are released.
fig. 25
L0D0384m
