145
W
A
RNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
ST
AR
TING
AND DRIVING
IN AN
EMERGENCY
fig. 11
L0D0397m
fig. 12
L0D0163m
❒
for cars fitting alloy rims, remove
the hub cap using the screwdriver
provided levering in groove
E-
fig. 11
, as shown in the figure;
❒
loosen the bolts of the wheel to be
replaced by about one turn with the
wrench provided
E-fig. 12
; if the
car is fitted with alloy rims, shake
the car to facilitate removing the
rim from the wheel hub;
❒
operate the device
F- fig. 13
to ex-
pand the jack, until the groove
G
on the upper part of the jack is
correctly inserted on the lower
edge
H
of the body at indication
I
(at approximately 60 cm from
the front wheel centre or 80 cm
from the rear wheel centre);
❒
warn anybody nearby that the car
is about to be lifted. They must
stay clear and not touch the car
until it is back on the ground;
❒
fit the handle
L-fig. 13
to operate
the jack and lift the car until the
wheel to be changed is several cen-
timetres off the ground;
❒
for versions with wheel cap, remove
the wheel cap after loosening the
three fastening bolts and finally
loosen the fourth bolt and extract
the wheel;
❒
for versions with snap fitted wheel
cup, remove the cup being careful
not to damage it;
❒
make sure the contact surfaces be-
tween space saver spare wheel and
hub are clean so that the fastening
bolts will not come loose;
L0D0164m
fig. 13
