![background image](http://html1.mh-extra.com/html/lancer/820-lx/820-lx_technical-manual_3477603024.webp)
CHAPTER3 ACCES TO SUPERVISOR MENU
NT_820_910_1300_LX_ANG_V1 04_2007.doc
22
1.ACCES TO SUPERVISOR MENU
Switch on the machine by pressing
.
The display indicates the number of the last cycle performed.
P r o g r a m n ° 0 1
L A N C E R x x x x L X
Press and hold
button for 3 seconds to validate.
A
C
C
E S S C O D E
- - - -
Enter the access code
- SUPERVISOR -
.
If an incorrect code is entered, the following error message is displayed.
A
C
C
E S S C O D E
I N
C
O
R R E C T C O D E
Press and hold
button for 3 seconds to validate.
You must enter the correct access code.
Otherwise you access to supervisor menu.
S U P E R V I S O R M E N U
C o n f i g u r a t
i o n s
Note :
If the access code is not entered within 30 seconds, the display unit
returns to its initial state.
Summary of Contents for 820 LX
Page 1: ...TECHNICAL MANUAL 820 LX 910 LX 1300 LX...
Page 4: ......
Page 44: ......
Page 52: ...CHAPTER 4 FAULT ALARMS NT_820_910_1300_LX_ANG_V1 04_2007 doc 50...