810-815 LX / INSTALLATION
NI_810-815_LX_PILOTE_ANG_A.doc
18
Flush and drain all water supply lines to remove debris before making
connections to flexible hoses.
The hoses required to connect the washer to the various water inlets are supplied
with the machine.
The maximum length of flexible hoses should be less than 1500 mm (59 inches).
Disconnectors are provided for connecting the flexible hoses to the water supply
lines.
Make the connections by fitting the strainer filters
between the disconnector and the threaded
connection at the water supply line.
-1- STRAINER FILTER
-2- DISCONNECTOR
Knock-outs (pre-cut plates) are provided for the proper routing of flexible water
hoses.
I
N ORDER TO PROTECT THE FLEXIBLE HOSES FROM THE EDGE
OF THE PRE
-
CUT PLATES
,
INSTALL THE PROTECTIVE RUBBER
EDGING WHICH IS SUPPLIED WITH THE MACHINE
.
IT IS
SHIPPED INSIDE THE CHAMBER WITH THE DOCUMENTATION
.
-1-
KNOCK-OUTS (PRE-CUT PLATES)
-2-
PROTECTION
