VersaPour Manual
www.lancerbeverage.com
Page 11 of 13
Hoshizaki Lancer reserve the right to change specifications without notice.
Images are for illustration purposes only as product may vary.
No 066 30 October 2017
5.5. Optional Valve Kits
PARTS LIST
PART NO.
HL PART NO.
ALT. PART NO.
DESCRIPTION
85-5172
21000183
KIT LEV VERSAPOUR SODA BUTTON
5.6. Label Size
52mm wide x 73mm high (
±
0.5mm)
6. Trouble Shooting
TROUBLE
CAUSE
REMEDY
Water leakage around
nozzle.
• Damage to sealing surface of nozzle
• Replace nozzle.
Leakage between
upper and lower
bodies.
• One or more retaining screws loose.
• Paddle arm assemblies are
worn or damaged
• Tighten all six (6) retaining screws.
• Replace paddle arm assemblies.
Miscellaneous leakage.
• Gap between parts.
• Damaged or improperly installed o-rings.
• Tighten appropriate retaining screws
• Replace or adjust appropriate o-rings
Insufficient water flow.
• Water flowing pressure is too low, or
restricted
• Foreign debris in water flow controls.
• Check incoming water from carbonator to
ensure minimum flowing pressure. See
SPECIFICATIONS.
• Check stems on mounting block to ensure it is
in fully OPEN position.
• Remove water flow control from upper body
and cleanout any foreign materials to ensure
smooth free piston movement.