Bullet Tower
24VAC / 50Hz
www.lancerbeverage.com
Page 11 of 34
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No: 68000028
Images are for illustration purposes only as product may vary.
No 061-2 - 17 December 2019
Programming Portion Size – No Top Off
•
To enter programming mode, touch small and extra-large cup size at the
same time. Hold for 2 seconds until LED lights.
•
To set portion, place cup under nozzle and touch corresponding portion
button (e.g. Small button highlighted) until the desired liquid level is
obtained.
•
Repeat for other cup sizes.
•
Note: If LED does out during programing all data is retained, however
you must re-enter the programming mode to set any remaining sizes.
•
To exit programming mode touch the Pour/Cancel button.
Programming Portion Size – Top Off
•
To enter programming mode, touch small, large and pour/cancel cup size
buttons at the same time. Hold for 2 seconds until LED light flashes.
•
To set portion, place cup under nozzle and touch corresponding portion
button (e.g. Small button highlighted) until the desired liquid level is
obtained.
•
Note: If LED goes out during programing all data is retained, however
you must re-enter the programming mode to set any remaining sizes.
•
Note: Faster blinking indicates a top off is needed. Regular blinking
indicates that the next size should be entered.
•
To top off, let the foam settle and then touch the size button again until
the desired liquid level is obtained.
•
Repeat ‘B’ & ‘C’ for other cup sizes.
•
Note: There is a 10 second foam settle time limit. You must deign top off
within 10 second or the program will save only the first pour and exist the
programming mode.
•
Note: User is unable to program another cup size until a fill, settle and
top off are all recorded.
•
To exit programming mode touch the Pour/Cancel button.
Notes:
1. Programming data will be saved if the keypad is in the programming mode and not
touched for 60 seconds.
2. Lock out that deactivates the selection will occur when a button is activated continuously
for 15 or more seconds. Power the unit off and on to clear the lockout.
3. If you touch the pour/cancel button for more than 55 seconds all buttons will lock out until
pour/cancel is released.
