Lancaster Water Treatment X Factor Series, Installation, Operating And Service Manual

Page: 12 / 16

PAGE 12
WATER METER AND METER PLUG
Item No. Quantity Part No. Description
1 1 V3151 Nut 1” QC
2 1 V3003* Meter Assy
3 1 V3118-01 Turbine Assy
4 1 V3105 O-Ring 215
5 1 V3003-01 Meter Plug Assy
*Part No. V3003 includes Items 2, 3 and 4
DRAIN LINE - 3/4”
Item No. Quantity Part No. Description
1 1 H4615 Elbow Locking Clip
2 1 V3194 Polytube Insert 5/8
3 1 V3192 Nut for 3/4 Drain Elbow
4 1 V3158 3/4 Drain Elbow
5 1 V3163 O-Ring 019
6 1 V3159 DLFC Retainer
7 1 V3162-010 DLFC 1.0
7 1 V3162-017 DLFC 1.7
7 1 V3162-027 DLFC 2.7
7 1 V3162-032 DLFC 3.2
7 1 V3162-042 DLFC 4.2
BRINE REFILL
Item No. Qty, Part No. Description
1 1 H4615 Elbow Locking Clip
2 1 H4628 Elbow 3/8” Liquifit
3 1 V3163 O-ring 019
4 1 V3165-01* RFC Retainer Assy (0.5 gpm)
5 1 V3182 RFC
6 1 V4144-01 Elbow 3/8 Liquifit Assy w/RFC
*Assembly includes V3182 RFC.
WS1 & WS1.25 Drawings & Service Manual Page 17
Water Meter, Meter Plug and Mixing Valve
Drawing No. Order No. Description Quantity
1 V3151 WS1 Nut 1” QC 1
2 V3003* WS1 Meter ASY 1
3 V3118-01 WS1 Turbine ASY 1
4 V3105 0-ring 215 1
5 V3003-01 WS1 Meter Plug ASY 1
6 V3013 Mixing Valve Optional
*Order number V3003 includes V3118-01 WS1 Turbine ASY and V3105 O-ring
215.
3
4
5
1
2
6
THIS WATER METER SHOULD NOT BE USED AS THE PRIMARY MONITORING DEVICE FOR CRITICAL HEALTH
EFFECT APPLICATIONS.
NOTE: A water meter is not applicable for a TC control valve.
WS1 & WS1.25 Drawings & Service Manual Page 15
Drain Line – 3/4”
Water
Flow
Proper DLFC orientation
directs water ow towards
the washer face with
rounded edge.
Drawing No. Order No. Description Quantity
1 H4615 Elbow Locking Clip 1
2 PKP10TS8-BULK Polytube insert 5/8 Option
3 V3192 WS1 Nut ¾ Drain Elbow Option
4* V3158-01 WS1 Drain Elbow ¾ Male 1
5 V3163 O-ring 019 1
6* V3159-01 WS1 DLFC Retainer ASY 1
7
V3162-007 WS1 DLFC 0.7 gpm for ¾
One DLFC
must be
used if ¾
tting is
used
V3162-010 WS1 DLFC 1.0 gpm for ¾
V3162-013 WS1 DLFC 1.3 gpm for ¾
V3162-017 WS1 DLFC 1.7 gpm for ¾
V3162-022 WS1 DLFC 2.2 gpm for ¾
V3162-027 WS1 DLFC 2.7 gpm for ¾
V3162-032 WS1 DLFC 3.2 gpm for ¾
V3162-042 WS1 DLFC 4.2 gpm for ¾
V3162-053 WS1 DLFC 5.3 gpm for ¾
V3162-065 WS1 DLFC 6.5 gpm for ¾
V3162-075 WS1 DLFC 7.5 gpm for ¾
V3162-090 WS1 DLFC 9.0 gpm for ¾
V3162-100 WS1 DLFC 10.0 gpm for ¾
Valves are shipped without drain line ow control (DLFC) - install DLFC before using. Valves
are shipped without ¾ nut for drain elbow (polytube installation only) and 5/8" polytube insert
(polytube installation only).
4
*4 and 6 can be ordered as a complete assembly - V3331 WS1 Drain Elbow and Retainer Asy
  
    
Drawing No. Order No. Description Quantity
1 V3195-01 WS1 Refi ll Port Plug Asy This part is required for backwash only systems
2 H4615 Elbow Locking Clip 1
3 H4628 Elbow 3/8” Liquifi t 1
4 V3163 0-ring 019 1
5 V3165-01* WS1 RFC Retainer Asy (0.5 gpm) 1
6 V3182 WS1 RFC 1
7 V4144-01 Elbow 3/8 Liquifi t Asy w/RFC 1
Not Shown V3552 WS1 Brine Elbow Asy w/RFC Option
Not Shown H4650 Elbow ½” with nut and insert Option
*Assembly includes V3182 WS1 (0.5 gpm) RFC.










    


4
6
2
3
1
5